Please VERIFY your blade size and center hole size BEFORE ordering!

**No returns on used blades**

Blade Specifications
Length: 18”
Width: 2.5”
Center Hole: 1/2”
Thickness: .203”

A. Measure Blade Length

B. Measure Blade Width

C. Measure the Center Hole

More Cuts. Better Lift. Finer Clippings. Smarter Performance.

The Ballard X-Blade Dual Blade System is engineered to dramatically improve cut quality by increasing cutting frequency, airflow, and clipping processing—without forcing you into an extreme high-lift setup. By stacking two blades on each mower spindle using precision X-Blade adapters, the X-Blade system increases cutting frequency, airflow, and suction for finer clippings and a cleaner finish.

When used in the right conditions, X-Blades transform how your mower performs—especially for mulching, weekly maintenance mowing, and professional turf presentation.

Why Run a Dual Blade System?

The X-Blade setup doesn’t just add another blade—it fundamentally improves how grass is cut and processed inside the deck:

• More cuts per revolution for finer clippings and a more uniform finish
• Increased airflow and suction without excessive lift
• Improved clipping recirculation for superior mulching performance
• Cleaner discharge and better deck efficiency
• Fewer stragglers and more consistent cut quality

Unlike extreme high-lift blades, X-Blades boost airflow strategically, making them ideal for maintained turf where finish quality matters most.

Best Use Conditions

The X-Blade Dual Blade System performs best when used intentionally and in the right mowing environments:

✔ Weekly or regularly maintained lawns
✔ Mulching-focused applications
✔ Operators seeking improved cut quality without aggressive lift

Will the X-Blades damage your mower? 

No — when used correctly on compatible machines.

There are a lot of misconceptions about running two blades per spindle, so let’s clear a few things up.

The X-Blade is a bracket that holds two blades at a true 90-degree angle, keeping the setup properly balanced on the spindle. Machines that are compatible with a dual-blade configuration are typically commercial-grade mowers built with heavy-duty components designed to handle the additional rotating mass.

The X-Blade bracket itself is engineered to give slightly on hard impacts, helping protect more expensive components like blades, spindles, and deck parts.

⚠️ Blade selection matters.
Using the correct blades is critical, and following proper operation guidelines—such as engaging and disengaging blades at 50–70% throttle—helps prevent unnecessary wear.

The X-Blade system has been on the market for over 10 years, with hundreds of thousands of sets sold and used daily by contractors of all sizes.

To ensure the correct setup:

Use the Search by Mower guide on our website
Only run X-Blades on approved machines

X-Blades can be run:

• During leaf cleanups
• In heavy growth seasons
• Or all season, if desired

The blades used in the X-Blade setup can also be run as single blades at any time.

If you’re looking to improve cut quality, vacuum, mulching performance, and discharge velocity, X-Blades may be the upgrade you’re looking for.

Choose Your X-Blade Setup

Classic Silver X-Blade Setup – Balanced Performance, Proven Value

The Classic Silver X-Blade Setup pairs two proven blade styles to deliver reliable dual-blade performance across a wide range of mowing conditions. This setup improves clipping processing and airflow while maintaining predictable, all-season results.

Includes:
• 3 RAZOR Mid-Lift Blades
• 3 Ripper Mulching Blades
• X-Blade Adapters

This configuration balances lift and mulching performance and is a dependable upgrade over single-blade setups.

GOLD Premium X-Blade Setup – Maximum Mulching & Longest Edge Life

For blade sizes where a GOLD mid-lift blade is not available, the GOLD Premium X-Blade Setup is configured with six GOLD Hybrid Mulching Blades to deliver the highest level of performance and durability possible in a dual-blade system.

Rather than mixing blade styles, this setup focuses on maximum clipping processing, strong airflow, and extended edge life using Ballard’s most advanced blade technology.

Includes:
• 6 GOLD Hybrid Mulching Blades
• X-Blade Adapters

Featuring Titanium Carbide cutting edges that stay sharp up to 4× longer, this configuration is ideal for operators who want premium mulching performance, fewer sharpenings, and consistent results in maintained mowing conditions.

What Makes This GOLD Setup Different

• Dual-layer mulching design for aggressive clipping breakdown
• Increased cutting frequency with uniform blade performance across all spindles
• Titanium Carbide edges for extended sharpening intervals
• Built for professional use where efficiency and cut quality matter most

The Bottom Line

If you want a balanced, versatile dual-blade setup, the Classic Silver X-Blade System delivers dependable results at a great value.
If you want maximum mulching performance, premium durability, and the longest-lasting cutting edge, the GOLD Premium X-Blade System with six GOLD Hybrid blades is the top-tier choice.

⚠ Not recommended for:

• Sandy or highly abrasive soil

• Rough cutting or overgrown conditions

• Use with Hi-Rise or Mowchete blades (excess airflow may cause front-deck blow-out)