X-Blade Dual Blade Adapter (2 ½” wide blade – 5/8″ center hole)


Shipping: $8.00 – 10.00 US ($20.00 – 25.00 Canada)
Additional charges for shipping will apply for Hawaii, Alaska and International. Please contact us for details.

Advanced Chute Cover from Ballard Inc

PLEASE NOTE: The X-Blade Dual Mulching Blade Adapters fit all standard commercial mower blades that are 2 1/2″ wide and have a 5/8″ center hole.


Razor and Ripper Mower Blades from Ballard Inc

* Blades NOT included

*High Lift Blades NOT Recommended*


Triple Kit (3 adapters – 1 mower)(XB3-1): $34.99
Shipping ($8 US, $20 CA)

Triple Kit (9 adapters – 3 mowers)(XB3-3): $95.99
Shipping ($10 US, $25 CA)

Please VERIFY your blade size and center hole size BEFORE ordering
**No returns on used X-Blade Kits**

SKU: N/A Categories: , Tags: ,


The X-Blade Dual Mulching Blade Adapter Kits were designed to turn your ordinary side discharge commercial mower into an extreme grass pulverizing machine. The X-Blade Dual Mulching Blade Adapter Kits come in 7 options to fit most dual blade commercial mowers.



The X-Blade Dual Mulching Blade Adapter holds your original blade and an additional mulching blade at a perfect 90 degree angle. Your original blade (lower) will give the clean height of cut and the mulching blade above, with multiple cutting edges, pulverizes the cut grass as it cycles through the deck chamber dramatically reducing grass clipping size.

With the use of the X-Blade Dual Mulching Blade Adapter Kit you can not only mulch but bag more efficiently as well. This kit allows you to bag the grass with more vacuum and grass packing than ever before, as well as side discharge with confidence.

Also, when using The X-Blade Dual Mulching Blade Adapter Kit, you are ensuring a perfect balance to the machines blade spindles, which will not allow blade slippage, which can cause a blade to over torque and become nearly impossible to remove. We do recommend lowering the RPM’s when you engage and disengage the PTO clutch.

X-Blade Bobcat

Situation: It has been confirmed that the following Bobcat mower models, CRZ & XRZ, cannot use X-Blade adapters. Even though the blades are 2.5”W x 5/8 CH, the spindle design does not use a separate blade bolt. Instead, the spindle has a permanent threaded stud coming out of the spindle with a blade nut to secure the blade. This does not allow the option to lengthen the stud in order to accommodate the added blade and adapter to assure proper thread coverage to tighten the blade. Additionally, any mower that has the same spindle set up (with a permanent stud) cannot accommodate X-Blade adapters.

Bobcat Spindle

Additional information


Dual Kit (2 adapters – 1 mower), Dual Kit (6 adapters – 3 mowers), Triple Kit (3 adapters – 1 mower), Triple Kit (9 adapters – 3 mowers), Triple Kit (15 adapters – 5 mowers)