X-Blade Dual Blade Adapter (2 ½” wide blade – 5/8″ center hole)


Shipping: $5.00 – 12.00 US ($20.00 – 25.00 Canada)
Additional charges for shipping will apply for Hawaii, Alaska and International. Please contact us for details.

Advanced Chute Cover from Ballard Inc

PLEASE NOTE: The X-Blade Dual Mulching Blade Adapters fit all standard commercial mower blades that are 2 1/2″ wide and have a 5/8″ center hole.


Attention SCAG Owners: Available below, shorter blade spindle spacers required to use the stock bolts and keep the blades at the proper height under the deck and perform best. This is for the machines with the 1 ¼” tall stock spacer.


SCAG X-Blade Spindle Spacer
This shorter above blade spindle spacer allows you to run the stock SCAG blade bolt and keeps the blades at the same cutting height and perform best. Its not required but you would need to get 10” long bolts if you don’t use this spacer and the blades sit ¼” lower on the machine which can create some grass blowout.

Razor and Ripper Mower Blades from Ballard Inc

* Blades NOT included

*High Lift Blades NOT Recommended*
*NOT Recommended for 72″ Mowers*


Dual Kit (2 adapters – 1 mower)(XB2-1S): $25.99
Shipping ($5 US, $20 CA)

Dual Kit (6 adapters – 3 mowers)(XB2-3S): $59.99
Shipping ($10 US, $25 CA)

Dual Kit (2 adapters & 2 modified spindle spacers – 1 mower)(XB2-1-SCAG2): $42.99
Shipping ($8 US, $20 CA)

Dual Kit (6 adapters & 6 modified spindle spacers – 3 mowers)(XB2-3-SCAG6): $109.99
Shipping ($12 US, $25 CA)

Scag Spindle Spacer ONLY (2 modified spindle spacers – 1 mower)(SCAG2): $17.99
Shipping ($5 US, $10 CA)

Please VERIFY your blade size and center hole size BEFORE ordering
**No returns on used X-Blade Kits**

SKU: N/A Categories: , Tags: ,


The X-Blade Dual Mulching Blade Adapter Kits were designed to turn your ordinary side discharge commercial mower into an extreme grass pulverizing machine. The X-Blade Dual Mulching Blade Adapter Kits come in 7 options to fit most dual blade commercial mowers.



The X-Blade Dual Mulching Blade Adapter holds your original blade and an additional mulching blade at a perfect 90 degree angle. Your original blade (lower) will give the clean height of cut and the mulching blade above, with multiple cutting edges, pulverizes the cut grass as it cycles through the deck chamber dramatically reducing grass clipping size.

With the use of the X-Blade Dual Mulching Blade Adapter Kit you can not only mulch but bag more efficiently as well. This kit allows you to bag the grass with more vacuum and grass packing than ever before, as well as side discharge with confidence.

Also, when using The X-Blade Dual Mulching Blade Adapter Kit, you are ensuring a perfect balance to the machines blade spindles, which will not allow blade slippage, which can cause a blade to over torque and become nearly impossible to remove. We do recommend lowering the RPM’s when you engage and disengage the PTO clutch.

Additional information


Dual Kit (2 adapters – 1 mower), Dual Kit (6 adapters – 3 mowers), Dual Kit (2 adapters & 2 modified spindle spacers – 1 mower), Dual Kit (6 adapters & 6 modified spindle spacers – 3 mowers), Scag Spindle Spacer ONLY (2 modified spindle spacers – 1 mower)

How do I know which kit I need for my mower?

Please measure your mower blade width and center hole diameter.

How many adapters do I need?

The same number of mower blades that your unit has.

Will they work on push mowers, tractors or residential mowing machines?

Not typically, unless you are running a blade size covered in our product details.

What are the benefits?

The X-Blades create smaller clippings, less double mowing, cleaner turf, better striping and are great for leaf mulching.

What blades should I be using?

We recommend a standard lift on bottom and mulching blade on top. Or two standards in regular cutting conditions. Two mulching blades work great in heavy leaves. Never use high lift blades, as they are heavy and create too much vacuum causing grass blow out.

Do the X-Blade kits come with the mower blades?

No. Blades can be purchased separately at your local dealer or on Amazon.

Will my blades stay sharp longer?

Not necessarily, but it really depends on the turf type and cutting conditions.

Are they hard on my mower?

No, although we do recommend lowering the RPM’s when engaging and disengaging the blades to help with clutch pressure. In four seasons on the market, we have seen no adverse effects on well-maintained machines and you could possibly reduce the overall hours on your machine by a reduction in double mowing. They hold the blades at a perfect 90 degree position keeping them balanced.

Do they require the mower to use more fuel?

Yes, depending on horsepower and turf conditions, we have seen up to 25% increase in fuel usage, but that is easily offset in the reduction of double mowing and time spent mowing .

Does it change the mowing height?

Yes. You will cut ¼” lower, so adjust your mowing deck up one setting.

Will they bend?

They will bend if the blades hit something hard or are grounded at high RPMs. They are meant to give under extreme pressure to prevent any additional more costly mower damages.

Is there a warranty?

No. These have been tested with thousands of hours on mowers and thousands of users throughout the United States.

Will they work on mowers with blade center holes different than specified here? Star center? Hex head?

The center hole size needs to be as specified in our product specs. There are only a few exceptions when the center hole is larger than the blade center hole and spindle bolt where they will automatically center up once stacked and the center bolt is put through.

How long have they been out?

Since 2014 with tens of thousands of sets sold.

Do I need a longer spindle bolt?

Only on a few brands, specifically Scag and Exmark. Scag you typically need to go from a 9 ½ long bolt to a 10” long bolt sold at any hardware store. Exmark has a link in the XBE product description. The John Deere 900 series X-blade kit comes with bolts and reducer spacers.

Will they work if I have a factory mulching deck?

Yes, but we recommend two standard blades.

Do I need an Advanced Chute or deck chute blocking plate?

No, but being able to control the clipping disbursement is a great feature on any machine.

Write Your Question !

You will get a notification email when FAQ is answered/updated!