Mower Blades – 2 Pack (2.8.21)


Shipping: $7.00-15.00 US ($20.00-28.00 Canada)
Additional charges for shipping will apply for Hawaii, Alaska and International. Please contact us for details.

Razor, Ripper and Hi-Rise Mower Blades from Ballard Inc

Blade Specifications
Length: 21”
Width: 2.5”
Center Hole: 5/8”
Thickness: .203”

Please VERIFY your blade size and center hole size BEFORE ordering

**No returns on used blades**

Blade Assist from Ballard Inc

Pro Scraper from Ballard Inc

Razor (standard) 2 Pack: $39.99
Shipping ($7 US, $20 CA)

Ripper (mulching) 2 Pack: $39.99
Shipping ($7 US, $20 CA)

Hi-Rise 2 Pack: $39.99
Shipping ($7 US, $20 CA)

*High lift or our Hi-Rise blades not recommended in the X-Blade brackets. These are heavier and create more resistance, and on some machines will create excess grass blowout from the front of the deck*

Razor (standard) 2 Pack with X-Blade Adapters (2) combo: $68.99
Shipping ($7 US, $20 CA)

Ripper (mulching) 2 Pack with X-Blade Adapters (2) combo: $68.99
Shipping ($7 US, $20 CA)

The WorX - Razor and Ripper Mower Blades with X-Blade Adapters
THE WORX (2 Razor & 2 Ripper): $134.99
4 Blades with 2 X-Blade Adapters
Shipping ($15 US, $28 CA)


Ballard Products has brought you a line of new line of blades in both regular lift RAZOR and mulching design RIPPER blade made to exact OEM specifications for optimum performance. These hardened steel blades are tested at a Rockwell 45 rating for longer life and stay sharp technology. All blades are statically balanced and are coated with a silver non-stick powder coat finish. Will fit most commercial brands and sizes as seen in our fitment guide. All blades sizes we carry have a matching X-Blade kit as well.

  • Regular lift RAZOR blade and RIPPER mulching blades in multiple sizes for most commercial mowers
  • Longer cutting edge than most factory blades and others on the market
  • Rockwell rated 45 hardened steel for longer life and stay sharp technology
  • Statically balanced
  • Silver non-stick powder coat finish
  • Matches with all the available X-Blade kits
  • Hi-Rise blades are unlike anything on the market with a 1.5” tall fin with a bend at the end to increase air flow and velocity of the clippings out from under the deck


X-Blade Bobcat

Situation: It has been confirmed that the following Bobcat mower models, CRZ & XRZ, cannot use X-Blade adapters. Even though the blades are 2.5”W x 5/8 CH, the spindle design does not use a separate blade bolt. Instead, the spindle has a permanent threaded stud coming out of the spindle with a blade nut to secure the blade. This does not allow the option to lengthen the stud in order to accommodate the added blade and adapter to assure proper thread coverage to tighten the blade. Additionally, any mower that has the same spindle set up (with a permanent stud) cannot accommodate X-Blade adapters.

Bobcat Spindle


Additional information


Razor (2) Pack, Ripper (2) Pack, Hi-Rise (2) Pack, Razor (2) Pack with X-Blade Adapters (2) combo, Ripper (2) Pack with X-Blade Adapters (2) combo, THE WORX (2 Razor and 2 Ripper) – 4 Blades/ 2 X-Blade Adapters